S185 BOBCAT - Turbo diesel with 6ft bucket 
Capacity - 1850lbs.
Weight     - 6220lbs.

Auger	Trencher	Forks
Brushcat	Harley rake	Trailer

Pick Up and Delivery Available

Email now to reserve rentals@boilingspringssmallengine.com

331 BOBCAT EXCUVATOR
42hp diesel engine (non turbo)
Lift capacity is 2416 lbs
Arm reach of 192 inches. 

This unit is upgraded with a thumb for picking up material and rubber tracks.

A versatile piece of equipment with uses that include but not limited to digging footings, septic tank pits and lines, drainage ditches and more.

Email now to reserve rentals@boilingspringssmallengine.com

Walk Behind Trencher – Barretto Model 1324-ST

This is a zero-turning-radius steerable walk-behind trencher that provides an easy way to trench sprinkler grids and other applications. This all-hydraulic trencher offers excellent maneuverability and easy 1-hand steering. Precise wheel control helps eliminate drifting, making the 1324ST ideal for trenching uneven terrain or hillsides. Long, arching curves are possible with virtually no extra effort on the part of the operator. The 1324ST is powered by a Honda GX390 13-hp. engine.

Width of trench – 4”
Depth up to – 24”  

Email now to reserve rentals@boilingspringssmallengine.com

Bed Edger – TRENCH MASTER model F781H

Prefect for those of you who want to dress up and outline your flower beds.  It will dig a 5 inch wide and 2 inch deep trench to help with weed control and preserve your mulch line.

Email now to reserve rentals@boilingspringssmallengine.com

Core-Aerators – Husqvarna Aerator AR19/AR25

Patented free-wheeling outer tires for the best maneuverability and least turf damage.  Five rows of tires, 30 individual coring spoons provide the most holes per square foot for the most effective aeration. The high speed provides greater productivity, the simple design offers an easier operation. 

Aerating Width:  19"and 25"
Aerating Depth:  Variable to 3"
Aerating Pattern:  3.8 x 6.5 inches

BOXER 530 mini loader

This unit is able to perform most of the same jobs that a full size bobcat can do, but in a small compact version. It can fit into a walk in gate on your chain link fence and can carry 825 lbs.  It has a 30hp Kohler engine and weighs in at 2410 lbs. without bucket.  It is hand controlled and has a platform that you stand on to run the machine.

Boaring Tool	Trencher	Auger
Ground Leveler	Harley rake	Trailer to haul it

Pick up and delivery available

Email now to reserve rentals@boilingspringssmallengine.com

STIHL HT 101

The HT 101 pole saw that extends out to 12 foot, has a 12 inch bar, and a 32cc 4-mix engine. This will keep you and the ground, off the ladder, to safely trim your trees.

HUSQVARNA 650RTT Tiller

This has a 6.5 hp Briggs & Stratton engine, with a 17 inch tilling path.  This unit has counter rotating tines and will work for all your tilling needs.

Chainsaws

We offer STIHL MS 170, 14 inch bar chainsaw. It has a 31.1cc engine and is good for trimming and lite cutting situations.

Log Splitter

The BARRETO 620LS is a unit that will allow you to split either vertically or horizontal.  It has a Subaru 9 hp engine and can split up to a 25 inch log. The unit weighs 610 lbs. and can easily be pulled by any vehicle.

Compactor

We offer a BOMAG BP 18/45-2 plate tamp, with a 5.5 hp Honda engine.  This unit is for compacting dirt and lite gravel.

HUSQVARNA K750

We offer a HUSQVARNA K750 power cutter, with a optional 14 inch blade.  This unit is hand held and is used to cut anything from pipe, stone, concrete, metal, tile, etc.

Auger

The STIHL BT 121 is a one man auger. It has a 30.8 cc engine and bits that range from 3 inch to 8 inches for digging, and 10 inches for planting.

Sod Cutter

We offer a HUSQVARNA SC18A sod cutter, with a 5.5 Honda engine.  It will cut a 18 inch path and is four wheel drive.  It has two cutting speeds and powered reverse.

Pressure Washer

We offer a HUSQVARNA 1340PW pressure washer, with a 4000 psi pump, and Honda GX390 commercial engine.  It has 5 quick change nozzles for different spray patterns and a foaming nozzle.

Wood Chipper

CARLTON 1260 wood chipper is the perfect answer for trimming and pruning those smaller limbs up to 3”. It is gas powered and can handle up to a 3 inch dia. limb.

Jack Hammer

We offer a MAKITA AVT electric jack hammer with spike attachments.  Runs off of 110ac power and is used for breaking up concrete/asphalt.

Leaf Blower

We offer a LITTLE WONDER SHO 5hp walk behind blower.  Good for blowing off parking lots and heavy leaf areas.

Concrete Cutter

We offer a NORTON C13 walk behind concrete cutter.  It has a Honda engine and its own water tank, to keep the blade cool while you cut.